0-99.9% 2 Pins Digital Wood Moisture Meter Humidity Tester Timber Damp Detector 0.5 percent Accuracy Moisture Meter MD-2GU
Main Features:
● Employ contact pin resistance to test, adopt high-precision electron components to test the moisture value on over one hundred kinds of common wood by group internally
● In appearance, use ergonomics. It is easy and fast for user to use the meter to test with simple key operation mode and comfortable hand feeling
● Can be used to test all kinds of wood paperboard and dry cargo
● Large LCD display of wood moisture value
● Built-in four kinds of patterns with precise testing
● Employ ergonomics design to adapt various special occasions
● Built-in low battery detection and automatic power off
● Electrode length: 10mm
● Measurement principle: electrical resistance
● Electrode pins: integrated
● Auto power off: after about 10 minutes
● Power supply: 1 x 9V battery (not included)
Wood Species Group:
A: teak, walnut, afrormosia, rubber tree, imbuia, kokrodua, niove bidinkala, cork
B: keruing, white poplar, beech, cedar, tola
C: lauan, ash, elm, fir, maple, padauk oak, cherry
D: basswood, larch, pine, birch
Special function:
Wood Moisture Meter with LCD Display
Material: ABS
Accuracy : 0.5 percent
Measurement range : 0 - 99.9 percent
Resolution: 0.1 percent
Package weight: 0.17 kg
Product size (L x W x H): 13.00 x 7.00 x 3.00 cm / 5.12 x 2.76 x 1.18 inches
Package size (L x W x H): 15.00 x 8.50 x 4.00 cm / 5.91 x 3.35 x 1.57 inches
Package Contents:
1 x Wood Moisture Meter,
1 x English Manual
Measurement Instructions:
1. Remove the cap to expose the needle electrodes.
2. Power ON the Instrument.
3. Select the appropriate wood calibration scale A, B, C, D
(See the Wood Calibration Tables later in this guide) Using "MODE" button.
4. Push the needle pins into the wood and observe the reading.
5. Power OFF the instrument.
|
|
0-99.9% Two Pins Digital Wood Moisture Meter Humidity Tester Timber Damp Detector 0.5 percent Accuracy Moisture Meter Images
|
